Unique, state-of-the-art leak detection and environmental monitoring system, the Floodline® HLD control panel is a true hybrid, the only system that is able to accept input alarms and provide detailed data from water, multi-gas and oil leak sensors as well as temperature and humidity sensors simultaneously.
The Floodline® Multi-Zone Control Panel operates the network of leak detection zones. A zone can be a single point or many metres long and the whole network is continuously monitored for leaks and continuity. Zones are electrically isolated from each other and individually displayed so the system can accept and report any number of simultaneous or consecutive zone alarms - true multiple leak reporting - an alarm in one zone has no affect on the normal monitoring of its neighbours or the rest of the system.
The Floodline® One-Zone water leak detection control panel offers a low cost, stand-alone system where a small amount of detection is required. One or more Floodline® sensors can be connected.
Output relays are provided for connection to remote alarm, BMS etc. LEDs provide clear and easy to understand status and alarm information.
Floodline Ranger® is a distance measuring system comprising control panel and detection cable providing leak detection for up to 1500 metres.
The Floodline® 1-Zone Module is a self-contained single zone leak detection module specially designed for incorporation into other control/alarm systems, air conditioning units, BMS etc. The module can connect to any number of Floodline® leak detection sensors for water, oil and gas.
Floodline® 8-Way SVCP controls the operation of solenoid valves to isolate a water supply when a leak is detected by a Floodline® zonal control panel and associated sensors.
Our revised and improved version of the 8-zone leak detection cable now includes several additional qualities including fire, electrical and smoke tests complying with current recognised standards. This is in addition to the original concept of providing 8 leak detection zones per length of cable.
The unique multi-zone construction of Floodline® Multi-8 High-Sensitivity Detection Cable allows up to eight separately reporting detection zones to be provided from one length of cable and builds on the success of the original Floodine® Multi-8 cable. Floodline® Multi-8 High-Sensitivity Detection Cable is more suited than the regular Multi-8 cable when attached to the underside of pipework or soffits.
The unique construction of the Floodline® 1-Zone Detection Cable has two cores twisted around a central former, covered with a mesh outer braid. Floodline® 1-Zone Detection Cable provides a solution for highly sensitive applications, particularly for able tied directly to the underside of pipework.
Floodline® 1-Zone High-Sensitivity Detection Cable provides a simple and cost-effective solution for highly sensitive applications, particularly for cable-tying directly to the underside of pipework.
Floodline Ranger® Water and Conductive Liquid Leak Detection Cable detects the presence of water at any point along its length. Installed with a Floodline Ranger® Leak Detection Control Panel, the cable senses the presence of water, triggers an alarm and pinpoints the location.
A tough, compact sensor housed in a Floodline® Stainless Steel Guard Plate, ideal for areas where conductive liquids are liable to pool. Available in horizontal format for mounting on flat surfaces or vertically against a wall this is an ideal sensor for industrial applications.
Floodline® Point Sensor in Plastic Casing is a compact and robust unit in a robust ABS casing to give heavy duty, physical protection and assist fixing and adjustment, Point Sensor is suitable for vertical or horizontal mounting. The alarm is activated when water or any conductive liquid comes into contact with the probes.
Available as standard in a flexible plastic sheet format with carbon detection tracks, the flexi-pad has found a niche market with several data centres. We have also manufactured bespoke versions to meet the exacting needs of customers.
The Floodline® Smart Flexi-Pad Sensors have been specifically designed for installing in narrow voids such as underneath dishwashers, washing machines, sinks, baths, and showers. Smart Flexi-Pad comes in two versions, Audible Sounder or Wi-Fi.
Floodline® Fan Coil Sensor water leak detection unit is a robust, self contained, single-zone leak detection system which is mounted horizontally. It can be connected to any BMS that has the facility to accept volt free contacts.
The Floodline® Pipe-in-Pipe Sensor is based around a Point Sensor and adapted for fitting into a female threaded socket provided at strategic points in the outer pipe. Short stainless steel probes extend into the cavity, or annulus, created between the inner and outer pipes. When liquid escapes into the cavity and contacts a sensor the alarm is activated. Two types of device are available for water and oil (oil/any liquid).
The Floodline® Tundish/Overflow sensor is designed to be attached to the overflow of a toilet cistern or other tank to provide an immediate automatic warning in the event of an overflow. The sensor can be used singly, or in multiples, connected to any Floodline® alarm panel.
Micro-processor controlled module MDD 256/T was built to oversee the Digital Gas Detection System (DD). It is designed to work with a range of gas leak detectors and control modules using RS485.
The Floodline® Output Relay Control Monitoring Unit, R4/T is an additional, addressable control module for extracting local control of actuators and signalling devices. MDD-R4/T digital control module expands the digital gas detection system. The module enables the separation of local control of executive devices and signalling devices for a selected group of up to 32 detectors working in the DGDS. There are four contact outputs and two 12V alarm outputs.
Floodline® Digital Gas Detection System Visual Indicator provides monitoring of up to 32 detectors operating in a digital gas detection system as well as controlling other executive and signalling devices through contact outputs. Up to 7 Visual Indicators can be combined.
Floodline® Digital DD Multi-Gas Sensors are designed for continuous monitoring for the presence of specified gases in enclosed spaces. Control consists of periodic measurement for the concentration of a given gas in ambient air.
A variation on the point sensor, the oil sensor mounts horizontally or vertically for early detection of oil.
Floodline Ranger® Hydrocarbon Distance Measuring Leak Detection Cable detects the presence of liquid hydrocarbon fuels at any point along its length and does not react to the presence of water. Installed with a Floodline Ranger® Control Panel, the cable senses the presence of oil, triggers an alarm, and pinpoints the location of the leak within one metre.
The Floodline® DP01 Pipe-in-Pipe Oil Sensor is designed for liquid and oil leak detection in double containment cavities in pipes and tanks. The DP01 was developed by Andel in collaboration with Durapipe, one of the world’s largest double containment pipework manufacturers.
Floodline® P-TH3 Temperature and Humidity Sensor uses the latest self-recovery and self-calibration semiconductor technology to measure the temperature and humidity of an environment. The easy-to-read display screen continously shows temperature and humidity and the sensor can connect to a Floodline® Control Panel as part of a larger Floodline® leak detedtion installation or can be integrated into a BMS.
Andel’s tried and tested Floodline® multi-zone leak detection systems are well known for being the most reliable, effective and easy to use. The Floodline® Plug and Play Auto-Connect System allows instant, foolproof connection for quick, no-hassle installation by any trained engineer or contractor.
Floodline® Leader Cable is a dedicated, purpose-made cable for connecting Floodline® sensors to Floodline® control and alarm panels and for branching between detection areas on the same leak detection string.
The Floodline® Remote Alarm Unit provides a visual and audible warning of a leak or system fault. The Remote Alarm is available as a robust, surface-mounted ABS plastic box or a flush-mounted brushed chrome version for areas that require a more discreet appearance.
BREEAM (BRE Environmental Assessment Method) is the world’s leading sustainability and environmental assessment standard for the built environment lifecycle – from new construction to in-use and refurbishment. Versions are updated regularly in line with UK Building Regulations and different building versions have been created since its launch to assess various building types.
Floodline Breeameter® provides flow monitoring and water leak detection in line with the defined standards BREEAM W02 and BREEAM W03 and can aid in the accumulation of credits subject to a successful audit by an authorised assessor.
PIR WaterSave® is a motion sensor flow control system ideal for multi-occupancy buildings and installed into areas with running water such as bathrooms, shower rooms, WCs and kitchens. Reduces water usage, wastage and leaks. PIR WaterSave® provides flow monitoring in line with the defined standards BREEAM W03 and can aid in the accumulation of credit subject to a successful audit by an authorised assessor.